Shop other suppressor parts
- All Class 3 Parts
- Suppressor Covers & Wraps
- Suppressor Mounts & Thread Adapters
- Suppressor Pistons & Boosters
- Suppressor End Caps
- Shotgun Suppressor Adapters
- Suppressor Tools, Parts & Cases
- Suppressor Cleaning
Match the device to your can
A device from one mount system will not lock onto a can built for another. A few common pairings:
| Mount system | Used by |
|---|---|
| KeyMo and Xeno | Dead Air suppressors. |
| SRX and QD | Yankee Hill Machine suppressors. |
| R3 and M2 | Rugged suppressors. |
| Plan B and other 1.375x24 HUB devices | HUB cans from many brands. |
Brands you will see often
Brands like Dead Air, Yankee Hill Machine, Rugged, Breek Arms, SilencerCo and more.
Suppressor Flash Hiders & Brakes FAQ
Flash hider or brake?
A flash hider cuts muzzle flash and keeps the blast going forward. A brake cuts recoil but is louder for anyone beside you. With the can on, both just act as the mount.
Do I need a crush washer or shims?
Most devices need to be timed and torqued properly so the can lines up. Shim kits are in Suppressor Tools, Parts & Cases. A gunsmith can install it if you are unsure.
Will this fit my AR-15?
If it matches your barrel thread, usually 1/2x28 on 5.56. Check the thread listed on each product.
Parts and accessories ship like other gear, but a few states restrict some muzzle devices. Check the rules where you live before you order. We cannot give legal advice. Questions go to gungearwarehousellc@gmail.com.